specifications︰ Automatic soldering machine specifications
1. The application book specifications of specifications apply to a lead-free automatic
soldering machine model No.LG-350NPB
2. I perform flux application in sprey fluxer, and a summary book device of the devices is
an automatic soldering device to perform in preliminary heating, soldering, a cooling
process in the transportation process of the soldering device.
3. Machine consistion according to the follows.
1) Entrance chain conveyor 1set
2) The main body of machine 1 set
3) Main transportation conveyer 1 set
4) Preheater unit 1set
5) Cast iron solder pot for lead-free 1 set
6) LCD-operation panel 1set
7) A board transportation finger 1 set
8) Finger cleaner 1 set
9) Emergency stop switches 2places
4. The basic specifications of the machine
① Board effective dimensions ： Min.60 X 150mmMax.350 X 400mm
② Board thickness ： 1.6mm correspondence
③ It is lower part effective dimensions in a board
： The top surface, A 100mmH /lower part, Less than 8mm
④ Lead length ： 5mm ～Max.8mm
⑤ Board catching hold of charges ： More than both end faces ３mm
⑥ Transportation angle ： ４ degrees
⑦ Transportation direction ： left ⇒ right
⑧ Transportation height ： 750mm ±20mm（at 4 degrees ）
⑨ Input power supply ： 3φ 380V 60Hz28Kw/hr
⑩ Supply air pressure ： More than 0.5Mpa
⑪ Colore ： Standard color / white
5. Automatic soldering machine model No:LG - 350NPB type
1) Constraction
① The main body frame consists of a channel, a corner pipe, an angle. is covered with a
flat steel sheet, and, in the front, a hatchback-type door, the front lower part and
the rear consist of a desorption panel .
② Air exhaust duct ： φ200×2 places （More than exhaust quantity 25m3 / min）
③ Main body general view dimensions
： 3,280×1,550×1,300mm（Length X depth X height mm）
④ Supply power supply ： 3φ380V about 28Kw
２) Entrance chain conveyor
①Transportation method ：Carrierless type both ends separation belt transportation
② Transportation angle ： Main conveyer is equal (4 degrees)
③ Transportation height ： 750 ±20mm（at 4 degrees ）
④ Transportation speed ： 600-1800mm / min
（Right and left side independent volume adjustment）
⑤ Chain conveyer length ： 400Lmm
⑦ Transportation motor ： Single-phase alternating current 200V15W ×2pcs
3)Main conveyor
① Transportation method ： Carrierless type
② Transportation speed ： 600-1800mm / min
③ Transportation motor ： Single-phase alternating current 200V100W ×1pc
④ Transportation width adjustment
： Handle-style hand-operated width is variable（60-350mm）
⑤ A transportation nail ： Lug system Finger D-40
⑥ A transportation angle ： 4 degrees
4) Preheating unit
① Top side : COVER PREHEATING UNIT ( UPPER SIDE )
(PCB Temp.: 25~100 degree C)
② Botton side : LOWER SIDE PREHEATING UNIT
(PCB Temp.: 25~200 degree C)
③ Control system：2 zones independent temperature adjustment by the SSR-PID control
③ Heater capacity ： 380V 13.2Kw(2.7kw×6pcs=16.2kw)
④ Others ： It is with a tunnel-type cover
5) Cast iron solder pot
① Materials
Pot ： Cast iron + ceramic coating
Chamber / Nozzle ： SUS316 + Special Nitriding processing
② Heater capacity ： 3φ 380V 10.5KW sheathed heater indirect heating type
③ Primary wave inverter motor aspect 200V200W×1pc
Secondary wave inverter motor aspect 200V200W×1pc
④ Swing motor ： Single-phase alternating current 200V25W（Speed control type）
⑤Quantity of solder ： About 400kg (lead-free solder specific gravity： 7.4)
⑥Nozzle
Primary nozzle ： Three lines holes of Gemini swing method flat board type
Secondary nozzle ： Barias type
⑦ Wave height ： Operation nomal use Max. 8mm
⑧ Start up time ： about 2.5Hr (normal temperature - 250 degree C )
weekly timer in operation time.
⑨ Maximum temperature ： About under 280 degree C
⑩ Others
：Solder pot up-down/ drawer mechanism with a hand-operated handle.
6) Fresh air introduction-type cooling fan
① Upper part cooling fan ： Single-phase alternating current 200V21W ×2pcs
② Lower part cooling fan ： Single-phase alternating current 200V21W ×2 pcs
③ Operation switch ： on-off is possible with a panel
7) Emergency stop switches
① Each one in an entrance and t exit
8) Finger cleaning unit
① IPA supply pump ： Diaflum-type electromagnetic pump
② Cleaning method ： Circulation-style shower nozzle and brashing
③ Operation ： ON - OFF movement by the panel switch
④ Piping ： Polyethylene tube
⑤ Cleaning brush ： A product made in nylon
⑥ IPA-can receives it in machine

Advantages︰ Hatch window and front control unit can be compatible with easy operation and maintenance. This remarkable new model equips lots of devices correspond to lead free soldering such as extended pre-heat zone (1100mm) to achieve enough pre-heat time, and closer distance between pre-heat zone and solder pot to prevent temp drop, etc.

*** FEATURES ***
[1] Novel design with excellent operation and maintence ability.
[2] High stability and reliability, "Packman" chuck type finger (Model: F-35) equips this machine as standard.
[3] To imporve basic performance and operate-ability to equip following devices as standard: Input belt conveyor, Room lamp, Solder pot up/down and roll-in/out system by crank handle, Inverter controlled solder flow motor.
[4] "U" turn type sheath heaters are equipped on Pre-heater unit, and the unit is covered with pop-up type upper heat reflector.
[5] 1st nozzle wave width enforces twice as usual normal model to correspond to lead free soldering which required longer dip-time.
[6] Outer air leading cooling fan (both of upper & lower side) can adjust its height and direction.

Export Markets︰ Hong Kong & Mainland China

Pricing︰ USD118000

Payment Details︰ BY L/C AT SIGHT

Min Order︰ ONE SET

Ship Date︰ 60 DAYS

Standard Met︰ JIS

Product Image